PRODUCT INTRODUCTION
gravimetric weighing feeders are an essential component of any extrusion process. They offer manufacturers an accurate, efficient, and cost-effective way to measure materials, resulting in higher quality finished products. So, if you are looking to improve your extrusion process, consider investing in a gravimetric weighing feeder today.
WalthMac GraviMac series Gravimetric Dosing System is Walth launched star product. By analyzing the data of tractor and extruder collected by the system, the speed of tractor and extruder screw can be adjusted in real time to stabilize the product wall thickness. By controlling the minimum wall thickness and adjusting the concentricity in continuous production, the total consumption of raw materials is controlled, and the goal of saving 1-5% of raw materials is realized. The system is widely used in the production of plastic pipe, cable, optical cable, plastic film and other products overweight control.The single screw extruder or twin screw extruder equiped with this machhine,its output will be more stable.
PRODUCT DETAILS
Save up to 5% raw material Gravimetric control system can save raw materials for client by controlling the weight per meter, stable production process and product wall thickness. The system collects the state of the screw extruder and the tractor in real time, and accurately measures the material consumption of the extruder through a weighing sensor with a weighing sensor. |  |
 | 1/4,000,000. Stable wall thickness, save raw materials. |
Simple and easy to use The client only needs to set two basic parameters (output and weight per meter) to start production. Simple to operate and easy to use |  |
Shorten start-up time
In the boot process, the shortest time to reach the set meter weight value, to avoid the waste of manpower and material resources. It also reduces dependence on skilled workers.
APPLICATION Field
High precision plastic gravimetric control system is sutable for all kinds of plastic product produced by screw extruder:
Gravimetric weighing feeders are an essential component in any extrusion process. They allow for accurate and consistent dosing of materials, resulting in higher quality finished products. With a gravimetric weighing feeder, manufacturers can ensure that each batch is precisely measured, preventing over or under dosing and reducing material waste.
The great thing about gravimetric weighing feeders is that they are incredibly versatile. They can be used with a wide range of materials, from powders and granules to liquids and pastes. This means that manufacturers can use them for a variety of applications, including food production, pharmaceuticals, and plastics manufacturing.
One of the most significant benefits of using a gravimetric weighing feeder is that it saves time and money. By accurately measuring the materials, the extrusion process becomes more efficient, reducing the amount of time it takes to produce each batch. This can translate to significant cost savings over time.
PRODUCT CONGIGURATION
Model | Output(kg/hr) | Size（mm） |
GMS-04 | Up to 150 | 430x290x750 |
GMS-06 | Up to 350 | 460x320x810 |
GMS-12 | Up to 500 | 460*320*910 |
GMS-20 | Up to 900 | 510*360*1010 |
GMS-30 | Up to 1250 | 510*360*1230 |
DELIVER SHIPPING AND SERVING
The machine before delivery, will pass strict production test, to ensure the reliable quality.
All products are packed safely before delivery to ensure that the goods will not be damaged, scratched and other conditions during transportation.
We offer many modes of transportation including sea and air, international mainstream freight companies are supported.
FAQ
Q: 1. What is a gravimetric weighing feeder for extruders?
A:A gravimetric weighing feeder is a device that accurately weighs and dispenses a precise amount of material into the extruder. The feeder uses load cells and a digital controller to monitor and control the material flow rate, ensuring accuracy and consistency.
Q: 2. Why is a gravimetric weighing feeder important for extruders?
A: A gravimetric weighing feeder is important because it allows for precise control over the material flow rate, which is crucial for producing high-quality extruded products. Inaccurate flow rates can result in inconsistent product quality and wasted materials.
Q: 3. What materials can be used with a gravimetric weighing feeder?
A: Gravimetric weighing feeders can be used with a variety of materials, including plastic pellets, powders, and flakes.
Q:4. What are the benefits of using a gravimetric weighing feeder for extruders?
A:The benefits of using a gravimetric weighing feeder include improved accuracy and consistency in product quality, reduced material waste, and increased efficiency in the extrusion process. By controlling the material flow rate precisely, a gravimetric weighing feeder can help minimize downtime and increase production output.
Q: 5. How easy is it to install and maintain a gravimetric weighing feeder?
A: Gravimetric weighing feeders are designed to be easy to install and maintain. Most models feature a modular design that allows for easy access to components and quick replacement of parts. Regular maintenance, such as cleaning and calibration, is also simple and straightforward.
Hot Tags: gravimetric dosing mixing system, China, manufacturers, factory, customized, price, discount, quotation
