Loss-in-weight feeder is an advanced equipment with core technology and independent research and development technology. It has been used in many industries and fields, and has been well received by various manufacturers. The equipment has many advantages and is a material processing equipment with a wide range of applications, high precision and simple structure and easy cleaning. However, the equipment also needs to pay attention to several matters when it is working to ensure the normal use of the equipment.
The first thing that will affect the normal operation of the loss-in-weight feeder is that no items can be placed on the equipment when it is in use, because if the items are placed, the pressure on the motor will be too large, which will lead to the consequence of burning the motor. Therefore, when the equipment is working normally, the staff must check whether there is anything on the equipment.feaker is at a moment
Secondly, it can be seen from the above that the main power of the loss-in-weight feeder is the motor. Once the motor is damaged, it will not work normally. Everyone knows that the speed of the motor is very fast, so a geared motor is used to slow down the speed of power transmission. The staff should also pay attention to regular maintenance during normal use, and also need to check the working conditions of the two motors frequently.
There is another situation that will also affect the normal operation of the loss-in-weight feeder. This situation is dust. The accumulation of dust in the control box of the equipment will cause a short circuit in the circuit, which will cause problems such as equipment burnout. Therefore, when the staff uses it Be sure to regularly clean the loss-in-weight feeder and keep the equipment clean to ensure proper operation of the equipment.
The use of loss-in-weight feeders also requires attention to control the load
First of all, if the weight of the material transported by the loss-in-weight feeder during use is too large and the equipment is under excessive pressure, there will be problems with the operation of the equipment, and it will not be able to work well, so when the operator uses the equipment Need to pay attention to this issue.
The operator should pay attention to the impact force of the ore on the equipment when using the equipment, and try to reduce this impact as much as possible, otherwise the problem of overload will easily occur, thus affecting the production. Therefore, it should be tested before use, and the weight that the device can bear in normal operation can be obtained from the test, and then reasonable arrangements should be made according to this data.
Secondly, when purchasing a loss-in-weight feeder, there will be product descriptions, etc., which will clearly indicate the tolerance range of the equipment and the precautions when working. The manufacturer should read this description carefully before putting it into use, so as to ensure the future production went well.
