How to maintain electromagnetic vibration feeder?

How to maintain electromagnetic vibration feeder?
What are the maintenance precautions of electromagnetic vibration feeder? Xiaobian is happy to answer your questions:
1, regularly check whether the gap changes, whether there is too much dust, whether the spring plate is broken.
2. It is required to check whether the three big top bolts of the top tightening spring plate and the connecting screws of important parts are loose every shift every day.
3. After installation, the feeder should have a 20mm swimming gap, and the horizontal should be horizontal. The suspension device is flexibly connected.
4, electromagnetic vibration feeder such as used for batching, quantitative feeding, in order to ensure the uniform and stable feeding, prevent material flow should be installed horizontally, such as continuous feeding of general materials, can be tilted down 10 installation. For viscous materials and materials with large water content can be lowered
Tilt 15° for installation. The silo of the electromagnetic vibration feeder is not allowed to be unloaded, and the fixed material should be maintained to prevent the impact of the material on the tank.
5. The silo of the electromagnetic vibration feeder is not allowed to be unloaded, and a certain amount of material should be maintained to prevent the impact of materials on the tank.
6. When feeding, the stability of amplitude, current and noise should be checked frequently during operation, and abnormal conditions should be stopped in time.
7. The electromagnetic bearing should be filled with lubricating oil once every 2 months, and the high temperature season should be filled with lubricating oil once to once a month.
8. The controller of the electromagnetic vibration feeder should be placed in a place with less dust, no humidity, no high temperature, good ventilation, and often clean the dust.
9, if there is a percussion sound of the armature, it should be repaired immediately.
10, if you do not work, mechanical failure, you can contact my factory to run new goods, I plant free answer the electromagnetic vibration feeder repair and maintenance problems.